K06 Reducing Coupling

Posted · Add Comment
Reducing Coupling Grooved K06
Print Friendly, PDF & Email

K06 Reducing Coupling

Visit Our Official eCommerce Klampz website at KLAMPz.com
KLAMPz K06

Nominal Size InchesPipe OD InchesUL / FM PressureMaximum Working PressureDimension D InchesDimension L InchesDimension W InchesBolt/Nut Size Inches
2 x 1 1/22.375 x 1.9300 psi500 psi3.235.121.813/8 x 2 3/8
2 1/2 x 12.875 x 1.327300 psi500 psi3.825.941.813/8 x 2 3/8
2 1/2 x 1 1/42.875 x 1.669300 psi500 psi3.825.941.813/8 x 2 3/8
2 1/2 x 1 1/22.875 x 1.9300 psi500 psi3.825.941.813/8 x 2 3/8
2 1/2 x 22.875 x 2.375300 psi500 psi3.825.941.813/8 x 2 3/8
3 x 1 1/23.5 x 1.90300 psi500 psi4.416.561.811/2 x 2 3/4
3 x 23.5 x 2.375300 psi500 psi4.876.561.811/2 x 2 3/4
3 x 2 1/23.5 x 2.875300 psi500 psi4.876.561.811/2 x 2 3/4
4 x 24.5 x 2.375300 psi500 psi5.957.871.971/2 x 3
4 x 2 1/24.5 x 2.875300 psi500 psi5.957.871.971/2 x 3
4 x 34.5 x 3.5300 psi500 psi5.957.871.971/2 x 3
5 x 45.563 x 4.5300 psi500 psi6.5710.832.055/8 x 3 3/8
6 x 2 1/26.625 x 2.875300 psi500 psi7.8510.832.055/8 x 3 3/8
6 x 36.625 x 3.5300 psi500 psi7.8510.832.055/8 x 3 3/8
6 x 46.625 x 4.5300 psi500 psi7.8510.832.055/8 x 3 3/8
6 x 56.625 x 4.563300 psi500 psi10.0713.232.283/4 x 4 3/8
8 x 68.625 x 6.625300 psi500 psi10.0713.232.283/4 x 4 3/8
  1. Flexible Couplings in straight runs should be supported as close to the coupling as possible, or within the distance of 1/6 the span.
  2. Flexible couplings provide either axial or longitudinal movement. Depending on the type of groove used, reduce the published cut-groove figures by 1/2 (AWWA/ANSI C606).
  3. This coupling is not suitable for end-of-run with an end-cap. Vacuum could suck the end-cap into the coupling.
  4. Coating options: Epoxy, Paint, Dacromet, Hot-Dip Galvanized.
fm ul

FITTINGS, RUBBER GASKETED
Click to see certificate VIZM.EX26405

FITTINGS, GROOVED AND PLAIN END
Click to see certificate VIZA.EX26406

Related posts:

Comments are closed.