K72 Grooved Mechanical-Tee

Nominal Size Inches	Working Pressure	Hole Size Inches	Dimension "C" Inches	Dimension "L" Inches	Dimension "W" Inches	Bolt/Nut Size Inches
2 x 1 1/4	300 psi	1.75	4.72	3.27	2.76	3/8 x 2
2 x 1 1/2	300 psi	2.00	4.72	3.27	2.76	3/8 x 2
2 1/2 x 1 1/4	300 psi	1.75	5.47	3.27	2.87	3/8 x 2 3/8
2 1/2 x 1 1/2	300 psi	2.00	5.47	3.54	2.95	3/8 x 2 3/8
3 x 1 1/4	300 psi	1.75	6.10	3.27	3.23	3/8 x 2 3/8
3 x 1 1/2	300 psi	2.00	6.10	3.54	3.23	3/8 x 2 3/8
3 x 2	300 psi	2.50	6.10	3.94	3.23	3/8 x 2 3/8
4 x 1 1/4	300 psi	1.75	7.13	3.27	3.76	1/2 x 2 3/4
4 x 1 1/2	300 psi	2.00	7.13	3.54	3.76	1/2 x 2 3/4
4 x 2	300 psi	2.50	7.13	3.94	3.76	1/2 x 2 3/4
4 x 2 1/2	300 psi	3.00	7.13	4.61	3.76	1/2 x 2 3/4
4 x 3	300 psi	3.50	7.13	5.08	3.76	1/2 x 2 3/4
5 x 2 1/2	300 psi	3.00	8.35	4.61	4.29	1/2 x 3
5 x 3	300 psi	3.50	8.35	5.08	4.29	1/2 x 3
5 x 4	300 psi	4.50	9.41	6.06	4.45	1/2 x 3
6 x 2	300 psi	2.50	9.41	3.94	4.76	9/16 x 3 3/8
6 x 2 1/2	300 psi	3.00	9.41	4.61	4.76	9/16 x 3 3/8
6 x 3	300 psi	3.50	9.41	5.08	4.76	9/16 x 3 3/8
6 x 4	300 psi	4.50	9.41	6.02	4.82	9/16 x 3 3/8
8 x 2 1/2	300 psi	3.00	12.24	4.61	5.81	5/8 x 3 3/8
8 x 3	300 psi	3.50	12.24	5.08	5.81	5/8 x 3 3/8
8 x 4	300 psi	4.50	12.24	6.02	5.87	5/8 x 3 3/8

Over-Tightening U-Bolts on thinwall pipe may cause distortion or damage to both the pipe and fitting, resulting in joint-failure.
The Model K72 provides a full-flow design.
EPDM gaskets are supplied as standard (-34ºC) -30ºF (+110ºC) +230ºF. Optional: Silicone gasket (-40ºC) -40ºF (+117ºC) +240ºF.
Painted finish. Options: Epoxy, Dacromat.
Pressure rating 232 psi.