Prevent joint damage due to pipe movements with these Control Rod Units (Series CRU). These units are complete with two rods, four plates, eight nuts, plus steel and neoprene washers in standard zinc-plated steel.
DIMENSIONS
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE STATED| Complete Unit* API Part # | Size | Exp. Joint Application | Gusset Plate Part # | Plate THK | Plate Weight lbs | Control Rod Part # | Approximate Weight lbs |
|---|---|---|---|---|---|---|---|
| CRU0150 | 1.5 | BOTH | CRP0150 | 0.50 | 0.8 | CR0625-14S | 6.4 |
| CRU0200 | 2 | BOTH | CRP0200 | 0.50 | 1.0 | CR0625-14S | 7.2 |
| CRU0250 | 2.5 | BOTH | CRP0250 | 0.50 | 1.3 | CR0625-14S | 8.4 |
| CRU0300 | 3 | BOTH | CRP0300 | 0.50 | 1.6 | CR0625-14S | 9.6 |
| CRUS0400 | 4 | SINGLE | CRP0400 | 0.50 | 1.4 | CR0625-14S | 8.8 |
| CRUT0400 | 4 | TWIN | CRP0400 | 0.50 | 1.4 | CR0625-17T | 9.2 |
| CRUS0500 | 5 | SINGLE | CRP0500 | 0.50 | 1.5 | CR0625-14S | 9.2 |
| CRUT0500 | 5 | TWIN | CRP0500 | 0.50 | 1.5 | CR0625-17T | 9.6 |
| CRUS0600 | 6 | SINGLE | CRP0600 | 0.50 | 1.7 | CR0625-14S | 10.0 |
| CRUT0600 | 6 | TWIN | CRP0600 | 0.50 | 1.7 | CR0625-17T | 10.4 |
| CRUS0800 | 8 | SINGLE | CRP0800 | 0.50 | 2.1 | CR0875-18S | 16.4 |
| CRUT0800 | 8 | TWIN | CRP0800 | 0.50 | 2.1 | CR0875-23T | 17.6 |
| CRUS1000 | 10 | SINGLE | CRP1000 | 0.75 | 3.5 | CR0875-18S | 22.0 |
| CRUT1000 | 10 | TWIN | CRP1000 | 0.75 | 3.5 | CR0875-23T | 23.2 |
| CRUS1200 | 12 | SINGLE | CRP1200 | 0.75 | 5.0 | CR1125-18S | 34.0 |
| CRUT1200 | 12 | TWIN | CRP1200 | 0.75 | 5.0 | CR1125-23T | 36.0 |
| CRUS1400 | 14 | SINGLE | CRP1416 | 0.75 | 5.0 | CR1125-18S | 34.0 |
| CRUT1400 | 14 | TWIN | CRP1416 | 0.75 | 5.0 | CR1125-23T | 36.0 |
| CRUS1600 | 16 | SINGLE | CRP1416 | 0.75 | 5.0 | CR1125-18S | 34.0 |
| CRUT1600 | 16 | TWIN | CRP1416 | 0.75 | 5.0 | CR1125-23T | 36.0 |
| CRUS1800 | 18 | SINGLE | CRP1820 | 0.75 | 6.0 | CR1125-18S | 38.0 |
| CRUT1800 | 18 | TWIN | CRP1820 | 0.75 | 6.0 | CR1125-23T | 40.0 |
| CRUS2000 | 20 | SINGLE | CRP1820 | 0.75 | 6.0 | CR1125-18S | 38.0 |
| CRUT2000 | 20 | TWIN | CRP1820 | 0.75 | 6.0 | CR1125-23T | 40.0 |
| CRUS2400 | 24 | SINGLE | CRP2400 | 1.00 | 7.5 | CR1250-18S | 47.0 |
| CRUT2400 | 24 | TWIN | CRP2400 | 1.00 | 7.5 | CR1250-23T | 49.0 |
Notes:
- Complete units consist of the following: 2 Rods; 4 Plates; 8 Nuts; 8 Steel Washers; & 8 Neoprene Washers. If needed, 3 or more rod sets are available upon request.
- Standard material used is zinc plated steel
- Sets are also available in 304/316 Stainless Steel.
