KLAMPz K10 & K11 Elbow Pipe Fittings

Posted · Add Comment
Print Friendly, PDF & Email
90 Degree Elbow, Grooved

UL-listed and FM-approved K10 and K11 KLAMPz elbows are manufactured of cast ductile iron with a variety of coating options, but the standard is a paint coating. These fittings conform to ASTM A536 specifications and dimensions meet American Water Works Association and ASNI C606-06 specifications and have a maximum working pressure rating of 500psi.

Nominal Size InchesPipe OD InchesUL / FM PressureMaximum Working Pressure"C To E" Dimensions (Inches) K10"C To E" Dimensions (Inches) K11
1.251.660300 psi500 psi2.751.75
1.51.900300 psi500 psi2.751.75
22.375300 psi500 psi3.252.00
2.52.875300 psi500 psi3.752.25
33.500300 psi500 psi4.252.50
44.500300 psi500 psi5.003.00
55.563300 psi500 psi5.503.25
66.625300 psi500 psi6.503.50
88.625300 psi500 psi7.754.25
1010.750300 psi500 psi9.004.75
1212.750300 psi500 psi10.005.25
  • Fittings are cast ductile iron conforming to ASTM A536, Gr. 65-45-12 Ductile Iron
  • Dimensions meet ANSI/AWWA C606-06
  • Center to End Dimensions are manufacture’s standard
  • Fittings larger than 14″ may be fabricated from steel pipe to ASTM A53, Gr. B or equivalent.
  • Coating options: Epoxy, Paint, Dacromet, Hot-Dip Galvanized.
  • UL-listed and FM-approved